Genesis Community Livecast Reboots With WordPress Co-Creator Mike Little

After a brief hiatus, the Genesis Community Livecast is set to reboot next week, featuring an interview with WordPress co-creator Mike Little and Genesis community leaders Anita Carter and Sandee Jackson.  The discussion will revolve around both the contributions members of the Black community have made to WordPress and Genesis, as well as the significant

The post Genesis Community Livecast Reboots With WordPress Co-Creator Mike Little appeared first on WP Engine.

Read more »

Press Ahead With WordPress and WP Engine

The entire digital landscape has shifted over the last few months, making the website the front door for businesses across every industry. From restaurants to yoga studios, and universities to doctors’ offices, engaging online is now the new normal. At WP Engine, we’ve experienced our own digital transformations—engaging with each other in new ways using

The post Press Ahead With WordPress and WP Engine appeared first on WP Engine.

Read more »

Using Google Authenticator for SSH and Console Connections to Your VPS

Using Google Authenticator for SSH and Console Connections to Your VPSIn this tutorial, we’re going to show you how to setup your VPS to use two-factor authentication for both normal SSH connections and console logins with Google Authenticator.

What is Two-Factor Authentication?

“One factor” authentication is either “something you know” or “something you have”. For example, logging in with a password is “something you know” and so that is single-factor authentication. Two factor authentication requires both something you know and something you have. A common means to achieve this is by using SSH keys. You must have both the SSH private key file and know the passphrase to unlock that SSH private key. If someone looked over your shoulder and saw you type your SSH key passphrase, or if someone stole your SSH private key file, neither by themself would be sufficient. They would need to know both your passphrase and have your key file to be successful.

What Problems Are We Trying to Solve?

The problem with SSH private keys is that you must carry the file around with you. If you’re always logging in from home or from one laptop, that’s fine, but what if you want to login from a friend’s house, from work, or from the library? Either you have to carry your private key around on a USB or put it on cloud storage, neither of which is optimal. Is there a way we can require “something you have” without needing to have access a file? Yes, with Google Authenticator.

Another problem is console access. Your VPS provider provides console access as a way for you to access your VPS if you can’t get in via ssh (for example, if you munge the firewall rules).  Here you cannot use an SSH key file.  This means that access to all of your VPSes with that provider are dependent on whatever password you setup for the provider’s control panel. Worse, that password is sometimes emailed to you in clear text! This also means that if someone can get ahold of your email, then they can do a password reset, recover your control panel password, and compromise all of your VPSes. However, we can plug this hole, too, with Google Authenticator.

What is Google Authenticator?

Instead of having a key file, in this system your “what you know” is the Google Authenticator app. Every 30 seconds, the Authenticator displays a new 6-digit number. Through some crypto mathematical wizardry, your VPS knows what this number is. When you login, you’re prompted to enter this number after entering your Unix password.

To be clear, no one else can easily guess this number, and the number is only good for 30 seconds. So even if someone did see your number, they only have 30 seconds to try to reuse it. You can even defeat that by rate-limiting logins so that the number can only be used once.

Setting Up Google Authenticator on Your VPS

I’ll be using a brand spanking new Debian 10 VM I’ve named fortress.lowend.party. After imaging it, I’ll setup the PAM module for Google Authenticator and reconfigure sshd. PAM stands for Pluggable Authentication Module. It allows you to setup requirements for any kind of authentication – login, sudo, etc. In this case, we’re going to setup an sshd authentication that requires both the Unix password and Google Authenticator.

apt-get update
apt-get -y install libpam-google-authenticator

Google Authenticator requires time sync, so let’s make sure our VPS always has the proper time. We’ll use ntpd (the Network Time Protocol daemon) for this purpose.

apt-get -y install ntp
systemctl start ntp
systemctl enable ntp

NTP is timezone-agnostic, but if you haven’t done so, you might want to set your timezone properly here.

dpkg-reconfigure tzdata

Or if you know the name of the timezone you want to use:

timedatectl set-timezone America/Los_Angeles

Running Google Authenticator

Now I’ll switch to a user I’ll use for login (raindog308) and run the Google Authenticator setup.

raindog308@fortress:~$ google-authenticator
Do you want authentication tokens to be time-based (y/n) y

Say yes to this question.  Now a pretty cool QR scan code will print out, in your terminal, for you to scan with your phone:

Let’s setup the app while the QR code is still on your screen.

Setting Up the Google Authenticator App

In my case I’m using an iPhone. I’ve installed the free Google Authenticator app from the App Store and started it.

Tap Begin Setup (at bottom).

Tap Scan barcode.

Give permission to access your camera. Then hold your phone up to your screen so the QR code appears in the green box. Moments later, the app will register your authenticator.

Finishing VPS Setup

Now go back to your terminal session. Copy and save the secret key, verification code, and emergency codes in some secure place. An entry in whatever password safe you use is an excellent choice.

Now finish answering the questions:

Do you want me to update your "/home/raindog308/.google_authenticator" file? (y/n) y

Say yes!

Do you want to disallow multiple uses of the same authentication
token? This restricts you to one login about every 30s, but it increases
your chances to notice or even prevent man-in-the-middle attacks (y/n)

Your choice, but saying yes is more secure.

By default, a new token is generated every 30 seconds by the mobile app.
In order to compensate for possible time-skew between the client and the server,
we allow an extra token before and after the current time. This allows for a
time skew of up to 30 seconds between authentication server and client. If you
experience problems with poor time synchronization, you can increase the window
from its default size of 3 permitted codes (one previous code, the current
code, the next code) to 17 permitted codes (the 8 previous codes, the current
code, and the 8 next codes). This will permit for a time skew of up to 4 minutes
between client and server.
Do you want to do so? (y/n)

You shouldn’t really need this. Say no.

If the computer that you are logging into isn't hardened against brute-force
login attempts, you can enable rate-limiting for the authentication module.
By default, this limits attackers to no more than 3 login attempts every 30s.
Do you want to enable rate-limiting? (y/n)

Your choice but yes is the more secure choice.

Setting Up PAM and sshd_config

Now open a new shell and su or sudo to root. You’re going to keep this second session open so that if anything is fumbled while setting up Google Authenticator, you have a fallback session and can quickly fix things.

Edit /etc/pam.d/sshd and add the following two lines:

auth required pam_unix.so no_warn try_first_pass
auth required pam_google_authenticator.so

These lines mean mean “Unix password required, Google Authenticator required”.

Now edit /etc/ssh/sshd_config and change as follows:

UsePAM yes
ChallengeResponseAuthentication yes

This will require Google Authenticator for all users. Note that Google Authenticator is not required for SSH keys. So the requirements to login are either (1) you have your private ssh key file and know its passphrase, or (2) you enter the Unix password and enter the proper Google Authenticator 6-digit code. Note that root logins are special and are handled by the PermitRootLogin directive in sshd_config. Normally, PermitRootLogin should either be set to “no” or “prohibit-password” to require SSH keys.  We’ll fix console logins later in this tutorial.

Restart sshd:

systemctl restart ssh

Now let’s try logging in. Open a new terminal so you can use the root session as a fallback.

$ ssh raindog308@fortress.lowend.party
Password:
Verification code:
Linux fortress.lowend.party 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26) x86_64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
raindog308@fortress:~$

At the “Verification code” prompt, I entered the six-digit code on my Google Authenticator app. We are officially party rockin’!

Securing Console Login

To require Google Authenticator for console logins, you probably want to configure Google Authenticator for the root account so you can login as root on the console. Just repeat the google-authenticator steps above to generate the QR code and register it with your app. You’ll have two entries in your app:

Now edit /etc/pam.d/login and add this line:

auth required pam_google_authenticator.so

This is the same as one of the entries we put in /etc/pam.d/sshd.

Now if you go to your provider’s panel and try to login on the console (as root) you’ll find you’re required to use Google Authenticator.

Debian GNU/Linux 10 fortress.lowend.party ttyS0

fortress login: root
Password:
Verification code:
Last login: Wed May 13 16:20:09 PDT 2020 on ttyS0
Linux fortress.lowend.party 4.19.0-8-amd64 #1 SMP Debian 4.19.98-1 (2020-01-26)4

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@fortress:~#

Backing Up Your Google Authenticator Config

In the user’s home directory you’ll find a file called .google-authenticator. If you were to nuke your VPS, setup Google Authenticator again, and then place this file back in the user’s home directory (with proper ownership and mode 0600), Google Authenticator would work for that user.

If your phone was lost or for some other reason you needed to reinstall the Google Authenticator app, you would select “Manual entry” in the app and then enter both the account and the key. That was the part that said:

Your new secret key is: BY7QKIUJR2WLPRKT53UR5VPKZU

You did save that key somewhere safe…right?

The key also appears as the first line in the .google-authenticator file. Here, for example, is my .google-authenticator file on fortress.lowend.party:

BY7QKIUJR2WLPRKT53UR5VPKZU
" RATE_LIMIT 3 30 1589413925
" TOTP_AUTH
36720568
35095323
92648133
21906908
71813960

To simulate loss of my phone, I deleted the raindog308@fortress.lowend.party from my Google Authenticator app:

Then I hit the “+” button in the upper right and selected Manual entry:

I typed in my name for the account (raindog308@fortress.lowend.party) and then laboriously entered the key (BY7QKIUJR2WLPRKT53UR5VPKZU):

The entry was thus recreated:

I was then able to login again as raindog308 with Google Authenticator.

 

 

 

The post Using Google Authenticator for SSH and Console Connections to Your VPS appeared first on Low End Box.

Read more »

WP Engine Summit/2020 Goes Digital & Registration is Free

AUSTIN, Texas — April 9, 2020 –  WP Engine, the WordPress Digital Experience Platform (DXP), announced registration is open for its signature event, now in its fifth year, Summit/2020. Due to ongoing concerns around Covid-19, WP Engine has reimagined the conference for developers and marketers as a digital event, which will still take place on

The post WP Engine Summit/2020 Goes Digital & Registration is Free appeared first on WP Engine.

Read more »

WP Engine Summit/2020 Goes Digital & Registration is Free

AUSTIN, Texas — April 9, 2020 –  WP Engine, the WordPress Digital Experience Platform (DXP), announced registration is open for its signature event, now in its fifth year, Summit/2020. Due to ongoing concerns around Covid-19, WP Engine has reimagined the conference for developers and marketers as a digital event, which will still take place on

The post WP Engine Summit/2020 Goes Digital & Registration is Free appeared first on WP Engine.

Read more »

WP Engine Donates Services to Help GeekPack Teach Kids WordPress at Home for Free

If you’re a parent currently spending a lot of time at home with your kids, there’s no question you’re enjoying more of their company (than ever). That said, you might also be looking for educational activities that can occupy a bit of their time and help them learn something useful in the process.   GeekPack Create

The post WP Engine Donates Services to Help GeekPack Teach Kids WordPress at Home for Free appeared first on WP Engine.

Read more »